Carney All Seasons Blog: Archive for the ‘Heating’ Category

What Is a Downflow vs. an Upflow Furnace?

Monday, October 17th, 2011

When you go looking to buy a furnace in Yardley, you may well be surprised by how many different elements go into making a good purchasing decision. There are simply so many different kinds of furnaces available now and they each are more appropriate for certain situations. That means that finding the one that’s right for you is less about finding the one best unit than it is about finding the one that is the best match for your particular circumstances.

This applies to the type of fuel the furnace uses, its energy efficiency, and whether it’s an upflow furnace or a downflow furnace. Energy efficiency and fuel types are probably things that you’re more or less familiar with. But what are we talking about when we classify a furnace as an upflow or downflow model?

Well, it’s pretty much what it sounds like. These terms refer to the direction the air flows as it is taken in and heated by the furnace. So in an upflow furnace, the cool air is taken in at the bottom, warmed, and then expelled at the top. A downflow furnace, on the other hand, takes in cool air at the top and expels heated air at the bottom.

While this is all very exciting, it may still not be obvious what impact this will have on your decision about what type of furnace to buy. The main thing you’ll have to think about when you’re deciding between an upflow and a downflow furnace is where the furnace will be placed in your house.

An upflow furnace is generally installed in the basement so that the heated air is directed towards the parts of the house you want cooled and so that the furnace can be appropriately vented outside of the house. On the other hand, a downflow furnace would be installed in your attic for the same reasons.

So where you want to have the furnace installed is probably the biggest thing to take into account as you’re comparing these two types of equipment. Of course, whether you pick an upflow or a downflow furnace, you’ll still have to select the appropriate AFUE, size and fuel source to best meet your needs. But making the choice between upflow and downflow can at least make it easier to narrow down your options. If you need help choosing the best furnace for your home, contact your local contractor.

Tags: Furnaces, Heating, Maple Glen, Willow Grove, Yardley
Posted in Heating | Comments Off on What Is a Downflow vs. an Upflow Furnace?

Safety and Your Furnace

Friday, October 14th, 2011

There are many advantages to a safely operating furnace in your Telford home. The most important are the safety and comfort of a home’s occupants and the cost of running the furnace. There are several things you can do to ensure the safe operation of your furnace. There are some things you can do to ensure that your furnace runs safely.

Here is a checklist of ideas:

Clean or change furnace filters on a regular basis. Replace disposable filters and clean permanent filters using water or cleaning solutions. Your owner’s manual or a qualified heating contractor can suggest a regular maintenance schedule.
Check the exhaust vent from the furnace. Clear obstructions such as leaves, clothing, or animal nests from the vent pipe or chimney. Keep roof exhaust vents clear of snow. If there is a faulty exhaust system (like a blocked flue), of if there are cracks and leaks in the pipes or improper adjustment of the burner, or if there is lower air pressure indoors than outside, the furnace can create serious indoor air pollution.
A clear air intake is important too, since furnaces need fresh air to “breath” and complete the fuel burning cycle. Again, check for debris, snow, or animal nests in intake pipes.
If you have an older gas furnace, you may want to install a supplementary induced-draft fan that reduces the possibility of backdrafting. Some furnaces have automatic shutoff devices that turn off the furnace if it begins to backdraft.
Check internal components such as the blower motor and vacuum any dirt. Check belts and pulleys for excessive wear. You should consult your owner’s manual for any suggested maintenance tips on internal working components.
You may also want to check the pilot light to see if it is working and if it producing an even, blue flame. If the flame is uneven, it may be a sign of incomplete gas combustion, which can result in the creation of dangerous carbon monoxide gas.
Ensure that your thermostat is operating correctly by raising or lowering the temperature settings to make sure the furnace cycles on and off.
Install and maintain battery or hard-wired smoke and carbon monoxide detectors.

Externally vented natural gas furnaces, when properly designed and installed, will operate safely for years. But if you detect a problem, use the most common solution – contact a qualified heating professional to check out your furnace.

Tags: Furnace Maintenance, Furnace Safety, Hatboro, Heating, Maple Glen, Telford
Posted in Heating | Comments Off on Safety and Your Furnace

Poor Heating Performance with Your Boiler: Possible Causes and Solutions

Wednesday, October 12th, 2011

You don’t have to be a rocket scientist or a mechanical engineer to troubleshoot – and possibly diagnose – the problems with your boiler when its heating performance is erratic or non-existent in your Doylestown home.

The good thing about boilers is that they are typically reliable and long-lasting. There aren’t a lot of working parts that can break down and cause problems, compared to other home heating equipment. When problems do arise, they are usually related to the expansion tank or circulating pumps. But a problem can be much simpler – like a tripped circuit breaker.

The most common problems can be noise, no heat, or poor/erratic heating. Before calling a qualified heating and cooling professional, take a moment to see if you can figure out the what’s wrong.

If you have a noisy boiler it might be because of two things – a faulty circulating pump or water trapped in the return lines. If the pump breaks it will make a loud noise when its motor runs. Water can be trapped in the return lines, which may require “re-pitching” the lines to allow for a flow back to the boiler. You may be able to adjust the flow by positioning hangers on the piping but replacing a pump is better left to a professional.

If your boiler is producing no heat, it could be because of something as simple as a circuit breaker being tripped or a fuse being blown. Check your circuit breakers and fuse and reset or replace if necessary. Is your boiler thermostat in the heat mode? It should be but if it isn’t, make the switch. If your boiler has a standing pilot you should check to see if it is lit and if not, re-light it.

Other problems would take a professional to fix. For example, no heat can be traced to low water levels in the boiler. The boiler should always be half-full of water and if it isn’t, it is likely because of leaks or a faulty pressure reducing valve. Don’t try and fix the problem by yourself.

Low water levels may not cause the boiler to lose its heating capabilities, but may cause fluctuations in its heating capacity. Again, it is advisable to call a professional to diagnose and fix the problem. Poor heating can also be traced to mineral deposits in the boiler. Consult your owner’s manual on instructions how to flush out the boiler.

As always, read the owner guide or operating manual for your boiler. You should get some good tips on proper maintenance and troubleshooting. And have the phone number of a qualified professional taped to your boiler – just in case.

Tags: Boiler Maintenance, Doylestown, Harleysville, Heating, Sellersville
Posted in Heating | Comments Off on Poor Heating Performance with Your Boiler: Possible Causes and Solutions

Warning Signs of a Broken Furnace

Monday, October 10th, 2011

How do you know when your furnace is “on the fritz?” There are warning signs of a broken furnace and some are recognizable – but not all. A broken furnace not only deprives your Blue Bell home of heat and comfort, it also can be deadly, too.

Let’s look at some of the unrecognizable warning signs.

Each year, hundreds of people die and many more are injured from the most common household poison: carbon monoxide. This colorless and odorless poisonous gas comes from several sources and the furnace is the most common source of all; more precisely a broken or malfunctioning furnace. Carbon monoxide is a result of incomplete combustion of a fossil fuel, which is when a fuel does not burn correctly or completely. In a furnace, carbon monoxide gas comes from a poorly operating burner or a cracked heat exchanger. A properly tuned and maintained furnace greatly reduces the risk of carbon monoxide poisoning.

Since carbon monoxide gas is colorless and odorless, it can go undetected. It can make people sleepy and create flu-like symptoms. Sometimes a person may fall asleep and never wake up. But there are warning signs. Drowsiness, vomiting, or flu-like symptoms are a warning sign. Regularly scheduled maintenance of your furnace by a qualified heating and cooling professional and installation of carbon monoxide detectors can reduce the risk of falling ill to carbon monoxide gas.

Another “undetectable” warning sign is a higher energy bill. Sometimes you can’t detect a problem right away because, like carbon monoxide, there may be no obvious signs. Higher utility bills can be a sure sign of a furnace that is working too hard and running more than usual. This may be a result of clogged or dirty air vents, or dirty filters. If your monthly bills are higher than those of the previous year, it may not just be because gas prices are higher.

There are other warning signs of a broken furnace, too. The most obvious is the failure of your furnace to bring your home up to the desired thermostat settings or to maintain an even temperature. Cold or uncomfortable houses are sure signs of a broken furnace. The furnace may cycle on or off, causing an uneven or inconsistent flow of heated air. This can be because of a poor blower or a clogged furnace filter. If you don’t feel any moving heated air or detect any unusual odors or smells coming from your heating vents, that’s a sure sign of a broken or malfunctioning furnace.

A broken or cracked gas line can emit odors and can cause a furnace to malfunction, too.

Don’t take a chance of losing heat and comfort this winter. At the first possible warning sign, call your local heating and professional for a heating system tune-up.

Tags: Blue Bell, Bucks County, Furnace Repair, Heating Repair, Jamison, Plymouth Meeting
Posted in Heating | Comments Off on Warning Signs of a Broken Furnace

No Heat in the House? Things to Check and Do in Buckingham

Monday, October 3rd, 2011

As you get ready for the cold months ahead in Buckingham, it is a good idea to remind yourself of some basic heating maintenance and repair facts. In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Tags: Buckingham, Chalfont, Heating Maintenance, Heating Repair, Horsham
Posted in Heating | Comments Off on No Heat in the House? Things to Check and Do in Buckingham

No Heat in the House? Things to Check and Do

Wednesday, March 30th, 2011

In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

Tags: Colmar, Franconia, Montgomery County, Telford
Posted in Heating | Comments Off on No Heat in the House? Things to Check and Do

What Is Forced Air Heating?

Monday, March 28th, 2011

Chances are that you’ve heard the term forced air heating before, particularly if you’re in the market for a new home heating system. But what does that actually mean? The truth is that if you’re asking this question, you’re not alone. There are so many types of home heating systems out there that it’s common to be a bit confused and overwhelmed by it all.

The truth is that a forced air heating system is simply a heating system that distributes heat throughout your house using air to carry it. In this type of system, heated air travels through a system of ducts and is expelled through vents into the different rooms and areas of your home in order to maintain a particular temperature. That temperature, of course, is whatever you set your thermostat to, and when the desired temperature is reached, the heat will shut off until the temperature drops down again.

The main difference between the different types of forced air heating systems is the type of equipment that heats the air. For instance, you could have a gas furnace, an electric furnace, a heat pump or a hydronic coil. All of these are capable of heating air, and when paired with a fan, blower or air handler, can distribute heated air throughout your home.

Many forced air heating systems are remarkably energy efficient and can effectively keep you home comfortable all winter long. Additionally, they are generally made to be incorporated with central air conditioning systems for year round temperature control. Heat pumps are especially convenient in this way, as they’re able to both heat and cool your home depending on the season and your home comfort needs.

Particularly if you already have ductwork in place or if you’re choosing a heating system for a new construction home, it can make a lot of sense to opt for some type of forced air heating. However, if you’re looking to replace an existing heating system in a house that doesn’t already have ductwork in place, the need to put it in can add a lot to the overall installation costs of the system.

Tags: forced air, Holicong, Montgomery County, Schwenksville, Tylersport
Posted in Heating | Comments Off on What Is Forced Air Heating?

It’s Time for a New Furnace

Friday, March 11th, 2011

Replacing your furnace is probably not something you want to think about. After all, a new furnace is a big investment and not something you probably have too much experience with. And sometimes having your current system fixed or tuned up is all you need to get your home heating situation back on track. But there are certain situations in which it makes more sense to just go ahead and get a new furnace rather than simply patching up the old one.

For instance, if you have to call for either minor or major repairs to your furnace on a regular basis, it’s probably time to consider investing in a replacement. All of those repairs cost money and chances are that the furnace you’re paying repeatedly to replace isn’t going to last that much longer anyway.

Rather than continuing to dump money into a furnace that just isn’t cutting it anymore, you’ll be better off making the investment in a new unit. The truth is, you’re going to have to do it sooner or later and by buying a new furnace now, you’re actually saving all of the money you would have spent on repairing the old one for another year or so.

Also, a furnace that requires such frequent repairs is probably not functioning all that efficiently either. When you replace it with a newer model, you won’t just save money on repairs. You’ll also likely notice a considerable savings on your monthly energy bills because of how much more efficient your new model is.

Even if you haven’t been repairing your furnace often, you may be able to notice some signs that the old unit isn’t quite up to the task anymore. If you’re suddenly having some significant humidity problems in your house or if your home isn’t being heated evenly, there’s a good chance your furnace is on its way out.

And, in fact, even if your furnace is functioning just fine but is more than 10 years old or so, it’s very likely you’d benefit by replacing it. That’s because the newer furnaces available now are so much more energy efficient than their predecessors that the savings you’ll incur monthly will quickly make up for the initial installation investment.

Of course, you don’t want to get rid of a good furnace if you don’t have to. But if your furnace is getting close to the end of its expected lifespan, you may very well benefit by putting out the money for a new one now so you can start saving right away on your monthly energy bills.

Tags: Eagleville, furnace, Montgomery County, Perkiomenville, Telford
Posted in Heating | Comments Off on It’s Time for a New Furnace

What Is a Water Source Heat Pump?

Wednesday, March 9th, 2011

A water source heat pump operates much like a traditional air source heat pump except that it extracts and dissipates heat by way of water instead of air. This is certainly not a type of home comfort system that will be available to anyone, but if you live in an area close to a well, lake or other natural water source, it may be an option worth considering.

All types of heat pumps can provide excellent year round home temperature control by pumping heat in during the winter months and removing it during the summer. The main difference between the types of heat pumps is where they get the heat or dispose of it.

Traditional air source heat pumps get their heat from the air outside, as even relatively cold air actually contains a substantial amount of heat. They use this heat to keep your house warm in the winter, but as the outside temperatures go down below freezing, these heat pumps can become less and less effective.

Water source heat pumps, on the other hand, work on basically the same principle as air source heat pumps, but they extract heat from a body of water rather than the air. They do this by cycling water through a system of pipes that is laid out at the bottom of a body of water. As the water cycles through, it gathers heat from the lake or reservoir and then carries it back to your house.

In the summer, the process is reversed and heat is carried out of your house and expelled in the cooler water outside. Like air source heat pumps, water source heat pumps are slightly more efficient at cooling rather than heating, as even deep water will eventually get cold during the winter months. However, the water is still often warmer than the air, and so water source heat pumps can be a good alternative if you live in a slightly cooler climate.

Of course, you do also need to have access to an appropriate body of water to have a water source heat pump installed, which makes it something that is not available to everyone. But if you do live near such a body of water, a water source heat pump is definitely something worth considering.

Tags: Heat Pump Systems, Heating, Jamison, Montgomery County, Perkiomenville, Southampton
Posted in Heat Pumps, Heating | Comments Off on What Is a Water Source Heat Pump?

Space Heating vs. an Upgrade to Your Heating System

Monday, March 7th, 2011

If your heating system isn’t really cutting it anymore, it may be time to take a step back and consider what your options are. After all, upgrading to an entirely new heating system is a big investment and a large project that will likely disrupt your life at least for a short period of time. However, under certain circumstances it’s the best alternative out there.

One option to consider when you’re unhappy with your home heating situation is supplementing your central heating system with space heaters. These are generally inexpensive and can be placed virtually anywhere in your house or taken with you from one room to another.

Especially if there is a small part of your home that your heating system just doesn’t seem to reach or that you want to keep a bit warmer than the rest of the house, space heaters can be an excellent option. They’re small, safe and portable and can easily keep a smaller portion of your home or room cozy and warm.

However, you’ll have to take into account the operating costs of a space heater as well as the initial investment when you’re trying to evaluate the overall cost effectiveness of this option. Most space heaters run on electricity, which often costs considerably more than oil or natural gas. If your home heating system runs on electricity anyway, this might not be so much of a factor. But if you have an oil or gas furnace, you could wind up paying significantly more to run space heaters as supplemental heat over time.

Also, it’s worth considering that new home heating systems are likely much more energy efficient than the system you currently have in place. Although the initial installation cost can be pretty substantial, you’ll wind up saving a very large amount on your monthly heating bills by upgrading to a newer model.

Plus, you’ll be getting a system that should be able to satisfactorily heat your home without the need for space heaters or other supplemental heat sources. This translates into a pretty hefty savings over time and that’s something you’ll certainly have to take into consideration when you’re evaluating your options.

Tags: Abington, Energy Savings, Gwynedd, Heating, King of Prussia, Montgomery County
Posted in Heating | Comments Off on Space Heating vs. an Upgrade to Your Heating System