Carney Plumbing, Heating & Air Conditioning Blog

Pipe Inspection Camera: When to Use One

September 21st, 2011

For plumbers today, anywhere from Maple Glen to Willow Grove, pipe inspection cameras are a huge aide. In the past, it was often very difficult to determine the location of a blockage or a leak, or indeed if one even existed at all. But now with this great modern equipment, it is much easier to get a thorough picture of the exact state of a pipe system and the nature of a potential problem.

These types of inspection cameras are especially useful when a clog is located underground or when an underground leak is suspected. Many types of plumbing problems can have multiple possible causes. But with pipeline inspection cameras, you can know for sure quickly exactly what type of problem you are dealing with.

For instance, even if you know that an underground pipe is leaking, it can be next to impossible to figure out exactly where the leak is. But to fix the leak you will have to unearth the damaged section of pipe and repair it. If you cannot pinpoint the leak precisely, you will be forced to unearth a large section of pipe. This takes a long time and causes unnecessary, although hopefully temporary damage to your yard as well.

However, if you can determine exactly where the leak is, you can dig up only the affected portion of pipe. This saves a lot of time and labor and it also means that you can limit the disruption the work causes in your yard. And the best way to find a leak like this is to use a pipe inspection camera to get a look at the inside of the pipe before you ever begin digging.

You do not need to wait for an emergency situation to develop to make use of a pipe inspection camera either. This technology is also extremely useful during annual drainage and sewer maintenance visits to help ensure that there are no unnoticed problems lurking below the surface. It is perfectly possible that one of your pipes is getting close to cracking but has not done so yet. The repairs can be a lot simpler if you catch this type of problem early, and that is exactly what a pipe inspection camera makes possible.

Pipe inspection cameras are also useful during maintenance visits because they allow technicians to determine which parts of your system need the most work. They can see where the larger buildups are and get the job done quicker overall than they could if they were operating blind.

Things You CAN Do Yourself around the House: A Guide From Abington

September 19th, 2011

If you own a home in Abington, there are a lot of fun ways you can stay on top of regular maintenance without spending hundreds of dollars to hire a contractor. Sure, there are some tasks only a contractor should perform, but there are plenty of others you can take care of with a little spare time on the weekend.

Fixing Leaks – Unless it’s in a main line or in your sewer, you can usually fix a leak or clog in your pipes by yourself. Replacing a faucet, snaking a line, or taking apart a fixture should still be done with the help of manufacturer’s guidelines, but as long as you turn the water supply off correctly, you should be okay taking things apart and making quick repairs.
Yard Installations – Short of digging it up (always have it checked for gas and electricity lines), you can do pretty much anything on your own in the yard. This includes composting, landscaping, adding a barbeque pit or upgrading your back porch.
Painting – Feel free to paint anything in or around your home without the help of a pro. Just make sure to use proper ventilation and to ensure that you remove any old paint carefully. If you’re not sure about the age of your paint, it should be tested for lead before you chip it clean, especially if you have children.
Replace Appliances – Old appliances can be removed and replaced relatively easily as long as you have someone to help you get rid of the old ones. Also, if you have a gas stove or other appliances that run on gas, always have them checked by a professional. Never unplug gas lines without someone there to ensure the gas supply to your home is off.
Tiling – Tiling is something anyone can do, but make sure you’re ready for the time commitment. Especially if you plan on putting tiles on a wall, it’s easy to make a mistake and ruin good tiles or good walls. Also, proper sealing around water fixtures like a bathtub or sink is vital. If you’re not sure, call a plumber to help.

There are a lot of ways you can have fun and fix up your house without paying for a professional’s help. But, remember not to take on jobs that are too much for you. If you aren’t sure how to complete a task or you want a second opinion, never be afraid to call a professional in for some help. Even if they just check your work, it will save you money and you get the satisfaction of having done the work yourself.

How to Get Lime Out of Your Pipes (and Your Teapot): A Guide From Abington

September 16th, 2011

Lime deposits are what cause that white, chalky, filmy residue that you see on faucets, shower heads and tiles in your Abington home. Aside from being unsightly, lime deposits can also cause damage over time. Lime builds up inside the plumbing of your home, slowly degrading your pipes. Below are some tips to get rid of lime in common trouble spots.

Pipes

Lime most often builds up in pipes that carry hot water, since the water heater dissolves the lime in the water. The lime is then deposited on the inside of the pipes when it cools. Here are some steps to clear out the troublesome lime from those pipes:

Turn off your water heater and drain it so it is about half full.
Remove the pressure valve, being careful to follow the manufacturer’s instructions.
Pour solvent into the heater through the open valve. There are commercial products available specifically designed to break up lime deposits, but white vinegar can be used as a cheaper and greener alternative.
Replace the pressure valve, turn the heater back on and allow it to fill all the way.
Turn on hot water faucets throughout the house. Let the water run until it runs clear or doesn’t smell of vinegar, depending on which solvent you used.

Kettles & Coffeemakers

Mineral deposits in a kettle or coffeemaker can cause your morning beverages to taste bitter. To clean them out, try these techniques:

Put 2 tablespoons of water softener in your kettle and fill it with water. Bring to a boil and rinse thoroughly. Alternatively, you can use a 1:1 ratio of vinegar and water, then let it sit overnight after boiling.
Fill your coffeemaker’s reservoir with water plus 2 tablespoons of water softener. Or, fill it entirely with white vinegar. Either way, run it through once that way, then a few more times with pure water to rinse.

For more obvious deposits, like faucets and tiles, usually a combination of hot water and either lime remover or white vinegar will do the trick. You can get more instruction on removing lime scale at HowToCleanStuff.net.

Those are the tried-and-true methods for making your pipes last by keeping lime at bay. Some plumbers will swear to you that putting magnets on your pipes will prevent lime from building up. Data to support that is inconclusive at best, although it can’t hurt to try.

$200 off Any GE Geospring Hybrid Water Heater!

September 14th, 2011

This month only we are offering an incredible deal on the GE Geospring Hybrid Water Heater – $200 off! To make this deal even better, with the purchase of this water heater you can get a $300 Federal Tax Credit and a $300 PA Utility Rebate!

Not only are you saving a net of $800 on the installation of this electric heat pump water heater, the savings will keep on adding up for years to come. The GE Geospring Hybrid Water Heater costs less than a traditional electric water heater operate because it is so much more energy efficient, up to 62 percent! It also has an electronic LCD display to easily control the 5 available modes, including a high demand mode and a vacation setting, so you can make sure that you always have enough hot water for your needs. The GE Geospring Hybrid Water Heater is a great upgrade for any home!

If you have any questions about the GE Geospring Hybrid Water Heater, please give us a call today!

Offer expires 09/30/11.

How to Fix a Slow Drain: A Tip From Warminster

September 12th, 2011

Ever fill up a bathroom bowl or kitchen sink in your Warminster home with water and then wait forever for the water to drain? A clogged drain can take forever to free up and is often the source of frustration and a loss of precious time as you get ready for work or play.

The solutions to fixing a slow drain can be very simple or complex, requiring a little patience or expertise to a major service or repair bill. Let’s hope the solution is the former and not the latter. And here are some suggestions.

If your bathroom sink is draining slowly, remove the stopper and inspect it for any “cling-ons” – namely hair. One of the most common clogs can be hair wrapped around the shaft of the stopper. Remove the hair, replace the stopper, run some hot water and check to see how quickly the water drains down. If that simple fix doesn’t work, dig a little deeper.

Hair can be tangled in the flange or the horizontal rod and clip, further down the pipe. You may need to dig out the hair or debris with a long object like a screwdriver or wire hanger. Don’t bring out the “big guns” like a snake or auger if something simpler will do the trick.

Once the debris is cleared, you may even want to use a small hand plunger to force air down the pipe and remove any other residual debris that may be slowing down the water flow. These steps should clear up the problem. A liquid or granulated drainer cleaner may also break up the clog. Running hot water can do the trick, too.

If these solutions don’t work, a slow drain could be the result of a more serious problem. At that point you may want to use a snake on the problem or call a professional plumber to fix it.

If your kitchen sink drains slowly, the problem could be a build-up of food or grease in the pipes. Once again, using a plunger or chemical drain cleaner may solve the problem. But don’t discount the fact that something may be blocking the pipes, like a piece of bone or a child’s small toy (if you have a mischievous toddler). A visual check of the problem might be the simple solution to the slow drain “mystery.”

If you are at your wit’s end and the water drainage continues to be a problem, call a professional plumber. They may even be able to walk you through a cleaning process over the phone.

Steps to Take When Your HVAC System Breaks Down in Jamison

September 9th, 2011

Imagine this – it’s a sweltering summer day in Jamison. The humidity outside is obscene, hitting you like a wall when you open the door. So, the only place you want to be is on the couch with the cool air conditioned air being blown across your face. Sounds pretty good doesn’t it? Now, imagine what happens when that cool conditioned air stops flowing.

A breakdown in your HVAC system is the absolute last thing you want to experience on a day where the mercury dings 90+ but it can happen, and the only way to ensure things don’t get out of hand is to take the following steps.

Check Common Problems –While the system itself could be broken, make sure there are no other issues involved. Frequently, the electricity supply can be interrupted by a power surge or a tripped breaker. In both cases, you can usually get the system back online by yourself. However, you should call an electrician to inspect it as soon as possible.
Does it Turn On – If the air conditioning system turns on and simply doesn’t provide enough cooling for your home, it is likely a problem in the unit. In this case, check other common problems. Clogged filters can severely reduce efficiency and if the system freezes over, it may stop providing enough cooling.
Still Not Working? – If the system refuses to turn on and there are not clear problems that you can fix yourself, it’s time to call a professional. A professional HVAC contractor should be available almost any day of the week for emergency calls like this. Of course, in the middle of a heat wave or cold snap, it’s very likely that they may be booked up for a couple days. To avoid this happening, have routine maintenance done as often as recommended to avoid the possibility of being without cooling or heating indefinitely.

A good HVAC system is the only thing standing between you and discomfort, or worse, danger to your health. Don’t let the system go into such disrepair that you can’t use it at all.

Top 4 Upgrades For Your HVAC System: A Guide From Ambler

September 7th, 2011

Your HVAC system is a trusted part of your Ambler home’s comfort system. Without it you would be cold in the winter, hot in the summer, and breathing in contaminant laden air year round. So, it’s important that you install the best systems and subsystems available for your HVAC system. Here are some options to keep in mind when looking for ways to get the most from your heating and cooling.

Humidity Control – Don’t rely on your air conditioner to remove humidity in the summer. A dehumidifier is more energy efficient and reduces stress on your air conditioning system when the humidity gets high. In the winter, humidification allows your home to hold more heat, effectively increasing the efficiency of your heating system.
Air Filtration – Every air conditioning system and furnace comes with some form of air filtration, but is it enough? Standard filters are effective, but they are not always comprehensive. A good HEPA quality filter for your air handler and duct system will severely reduce the number of contaminants in your air supply and ensure that you and your family feel much better year round.
Ductwork Upgrades – If your ductwork is old, battered or starting to show its years, an upgrade may be in order. If nothing else, having your ductwork cleaned on a regular basis removes excess mold, dusty, pollen, debris and other pollutants that can affect your health and the quality of the air you breathe. Schedule annual cleanings of your ductwork and a biannual inspection to check for cracks and leaks.
Air Quality Controls – Beyond air filtration, you can upgrade your air handler’s ability to remove pollutants with a dedicated air cleaner and UV lights. These systems are installed in your air handler and/or ductwork to remove advanced pollutants like bacteria and mold and remove smaller particles including smoke, gas, and exhaust. Which system you need will depend on the level of contaminants in your home, so make sure you check with a contractor before choosing anything.

These upgrades are a great way to get more out of your HVAC system – in terms of both comfort and safety. Discuss your options with a contractor today to learn more.

Important Remodeling Tips From Solebury

September 5th, 2011

Remodeling your Solebury home is a big step. As you plan the layout of your new bathroom or the size of the bedroom being added to the second floor, make sure you take into account the effects your changes will have on the indoor air quality of your home. Here are some specific things to keep in mind:

Water and Moisture – When you build on to or remodel your home, one of the most common problems is excess moisture. The grade may not be built to handle the extra space or you may find that moisture is harder to block from your home than expected. However, it’s vital that any additions are as water tight as the original construction. Mold and mildew, as well as dust mites and other humidity and moisture borne pollutants are major health concerns.
Ventilate Properly – Most people assume that the best thing they can do is close their home up tightly to block out pollutants. But, indoor air can be as much as 100 times more polluted than outside air if it isn’t properly ventilated. Stagnant, stale air filled with dust, pollen and dander among other things is not healthy, so extend your ventilation system to support your new addition.
Proper Flooring – The floor you choose when remodeling has a major impact on indoor air quality. You want to ensure any water that gets on the floor, especially in bathrooms can be removed without it penetrating to the wood underneath. Properly sealed tiles and fixtures are a must.
Unsafe Building Materials – Modern materials are generally safe, but if your home was built before 1978, consider the risk of flaking paint or old insulation before you start demolishing a room for remodeling. Lead paint in window frames and doors can be a major risk if it flakes and enters the air and asbestos can be found in insulation in walls, wiring and pipes.

Remodeling is a big step, and likely you have a lot of things on your mind, but don’t forget to include the air quality in your calculations, both during and after the construction. The EPA has a fantastic resource on indoor air quality in home remodels to help you determine what things you should watch for in each room of the house as you make changes.

Save Money in the Long Haul with AC Maintenance

September 2nd, 2011

Every year, it’s recommended that you have an HVAC contractor visit your Blue Bell home and tune up your air conditioner. This visit will ensure the system is ready for the intense, regular use it will receive during the hottest months of the year. How much money can this visit save you, though? Let’s take a closer look.

Cost of Operating Your Air Conditioning

An air conditioning system on average costs a homeowner between $500 and $1500 per year to operate depending on the length of the cooling season and the efficiency of that air conditioner. That number represents top efficiency for the unit, however. When a system has dirty filters, hasn’t been cleaned properly or the thermostat is no longer calibrated accurately, the cost increases – sometimes dramatically.

Just how much more could you be spending on cooling each month when this happens? The EPA’s Energy Star website estimates an increase in cost of between 10-30% resulting from poorly maintained systems, and it can be even higher if your system is old and is severely affected by a drop in energy efficiency.

Annual Tune Up Necessities

So, what should be at the top of your tune up list? If you call a contractor, they will perform a variety of tasks including:

Inspect Coolant and Pressure Systems
Calibrate the Thermostat
Tighten Wiring, Capacitors, Relays and Contacts
Clean the Evaporator Coil
Clear and Clean the Condenser and Condensate Drain
Inspect the Condenser Fan and Motor
Check Compressor Efficiency

This is just a starter list for standard tune up of a central air conditioning unit. You can supplement this tune up by checking your filters once every 30 days and clearing away debris from around any outdoor units. You should also check your thermostat monthly to ensure it is working properly. If not, call for an inspection to avoid heavy increases in operating costs.

Major repairs to your air conditioning system generally take less than a day and when you’re on an annual maintenance plan, they cost significantly less than if you needed someone to fix the device in an emergency situation.