Carney Plumbing, Heating & Air Conditioning Blog

Quick Tips From Perkasie: How to Save Money on Air Conditioning

August 26th, 2011

You’ve probably heard once or twice that the cost of running your air conditioner is more than that of any other single electrical device in your Perkasie house. That means you’re spending hundreds and possibly even thousands of dollars each and every year to stay cool. It’s well worth the investment as the risk of not having air conditioning is much too high, but there must be ways to cut the costs, right? With careful attention to how your AC operates and when you use, there are some things you can do to slash those costs. Here are a few of the easiest:

SEER Matters – What is this magical acronym you hear so much? SEER refers to how many BTUs your air conditioner can produce with a single watt of electricity. A low SEER device therefore uses a LOT more electricity to produce the same volume of cooling as a high SEER device. Since current devices offer SEER of 13 or higher (some are up to 20+), just about any upgrade will save you money relatively quickly if your current air conditioner has a rating of 8 or lower.
Program Your AC – If you have a single point analog thermostat, you’re wasting a LOT of electricity. You’re either paying to cool your house while it’s empty or you’re coming home to a roasting hot living space. Purchase a programmable unit and set the system to 85 degrees when you’re not home. With timers in most digital units, you can tell it when you’ll be home so that you walk into a cool, comfortable space without having to keep it cool all day long.
Use the Landscape to Your Advantage – Instead of relying solely on your air conditioner to keep the house cool in the summer, plant some trees and shrubs around the house to block the sunlight. Simply adding some shade to your property can directly reduce how much heat your home absorbs throughout the day and reduce how much your AC unit needs to work to keep you cool.
Ventilate Your Roof – A good third of the heat in your home is absorbed directly through the roof. To keep this heat from affecting the rest of your home, install a roof fan that ventilates the excess energy and keeps the attic at a steady temperature. Less heat up top means less cooling needed down low.

A good air conditioning system is effective no matter what the temperature does, so it’s easy to forget how big your bill will soon be. To avoid an overblown bill, keep an eye on your cooling and follow these simple tips to cut back on use. To get more energy saving tips, talk to your HVAC contractor.

What Does the EPA Do for Indoor Air Quality?

August 24th, 2011

There are a number of agencies in the United States dedicated to protecting the health and wellbeing of citizens. What does that mean for you in Gwynedd? It means many of the rules and regulations related to indoor air quality are directly overseen by the EPA and the US government. For a better idea of how this impacts your currently lifestyle, here’s a quick look at what the EPA does.

Formation

The Environmental Protection Agency was formed in 1970 by Richard Nixon and the US Congress to oversee the regulation and oversight of air, water, land and hazardous waste. In short, the EPA works to keep our environment clean and safe.

The EPA and Homeowners

While much of what the EPA does relates to corporate pollution, regulations for manufacturing and consumer products, and development of safe methods of production for things like oil, food and water, the EPA has a big hand in ensuring your home stays safe.

Specifically, the EPA started and oversees the Energy Star program to help consumers purchase appliances and HVAC systems that use the least possible energy. Additionally, the EPA oversees the measurements and minimum requirements for home insulation and ventilation. This has as direct impact on indoor air quality.

Current EPA regulations are based on the ASHRAE Standards for low rise buildings and has been revised in the last two decades to ensure proper ventilation and insulation to reduce energy waste and maintain clean, fresh air.

The clean air act has a big impact on how homes are ventilated and maintained and the EPA does a lot of public service work to educate the public on ways to stay safe, including a recent campaign to get your home tested for radon – a potentially life threatening gas that can exist in any home, regardless of age.

Getting to Know the EPA

If you have an indoor air quality or suspect there may be issues in your home, one of the best resources on the Internet is the EPA’s indoor air quality website. It contains laws and regulations that impact your home (if you plan on remodeling or adding on to your home) and dozens of resources for testing and understanding the levels of pollutants in your home.

AC As a Safety Feature in the Home: A Tip From Horsham

August 22nd, 2011

Ask a hundred people in Horsham what the primary role of air conditioning is and I’ll bet you they say “comfort”. We seek out AC to stay cool and beat the summer heat, but did you know your air conditioning is a lot more than just a convenience – it is a safety feature in the midst of heavy heat waves.

Heat Is More than Just Uncomfortable

We tend to think of heat as an uncomfortable inconvenience. In reality, it is quite dangerous. According to the Center for Disease Control, heat waves killed 8,015 people between 1979-2003, more than hurricanes, tornadoes, lightning, earthquakes and floods combined in that time period.

Why is heat illness so dangerous? It comes on quickly and it’s easy to ignore the warning signs, especially when you are already uncomfortable. While hydration is important, the real risk occurs after you’ve become dehydrated – when your body can no longer keep itself cool. This is known as heat stroke and can lead to a number of life threatening conditions, especially for the elderly, infants and those with chronic conditions.

That’s where air conditioning comes in. On the CDC’s extreme heat preparedness webpage, air conditioning is listed as the number one preventative factor against heat related illness. Simply put – if you have an air conditioner, there is a much smaller chance you will get sick from the heat. Dehydration happens less frequently when you’re in an air conditioned environment, meaning that your body can regulate temperature internally and you feel comfortable – not a bad deal for a simple installation.

Staying Cool Is a Medical Necessity

Heat is more than just a direct threat. It addles the mind and makes your reaction times slower. In effect, by allowing your body to overheat, you put yourself at risk. Simple tasks like climbing a ladder or taking out the trash could result in an injury because you don’t have the energy or the mental clarity to perform them as you would on a normal day.

So, air conditioning is about a lot more than just staying comfortable – it’s a health issue. Especially if you have small children or elderly adults in the house or if anyone in your family has a medical condition like obesity, heart disease, mental illness, poor circulation, an air conditioning system is an absolute must during heat waves. If you need more information about how to keep your home cool, contact your AC contractor.

How to Calculate Duct Size for an AC System

August 19th, 2011

Duct sizing for air conditioning is a complex process using one of three methodologies. The goal of duct sizing is to provide the perfect space through which heated and cooled air can travel around your Conshohocken home. Ducts should provide ample air flow to keep you comfortable without overworking your HVAC system or costing you an arm and a leg on your energy bill.

Methods Used for Sizing

There are three methods used for most modern duct sizing. The first is the Velocity Method. The velocity method takes into account the speed at which air flows through the ducts based on their general size. A series of equations is used to determine this, including duct cross sectional area, air flow rate and air speed. A much more detailed breakdown is available on the EngineeringToolbox.com for those interested in the math behind the process.

In general though, the velocity method allows contractors to determine the appropriate size and layout of ducts based on their application (residential, commercial, industrial or high speed) and their position (main or branch ducts).

Contractors may also use the Constant Pressure Loss and Static Pressure Recovery methods to design ductwork for your HVAC system. The constant pressure loss method tends to result in more components but provides a more accurate reading of the actual pressure loss in the system based on the materials used and the layout of your ductwork.

Static pressure recovery focuses on ensuring the same pressure level is achieved at all vents and inlets for the system. It is probably the most complicated sizing method, however, so it is rarely used for residential installations.

Simplifying the Process

Were we to break down the process into its core components, this is what a contractor would do when sizing your duct work:

Determine CFM for Each Room – using the Manual J for load calculations, they would determine the CFM. This is based on the (Room Load/House Load) x Equipment CFM. The entire house must be measured and load calculations completed before this can be done.
Friction Loss Rate – Friction loss rate is the (Available Static Pressure x100 / Effective Length).
Duct Sizing – Finally, the contractor will use a chart or software to select ductwork based on the friction loss and CFM calculated in the first two steps.

The goal of all of this math is to ensure that the system installed is exactly as large as is necessary to distribute heated or cooled air to the entire house. Incorrect measurements result in improper delivery of that air and a system that doesn’t quite get the job done.

Will My Air Conditioning Work Better with Dehumidification

August 17th, 2011

There are a number of common misconceptions, in Blue Bell and everywhere else, about humidity and air conditioning and how one affects the other. In truth, humidity is a major part of the discomfort we feel when the mercury rises. It can be 78 degrees outside but feel miserable simply because the humidity is high. So, many people wonder whether a dehumidifier is a good solution to moderate heat and how it will work in tandem with an air conditioner.

Humidity and Your Air Conditioner

First, remember that air conditioning naturally lowers humidity because it cycles air through its condenser and evaporator coil. Conditioned air is naturally lower in humidity, regardless of what’s going on outside. So, if it is hot outside and humid, an air conditioner alone is very effective. On the other hand, a dehumidifier is useful is when the temperature isn’t that high but the humidity is.

Dehumidification not only lowers the relative humidity in your home, it reduces the need for cooling because you will feel more comfortable. Not only that, but a dehumidifier costs significantly less to run. So, when the temperature outside isn’t that high, there is no need to use thousands of watts per day of electricity just to stay comfortable.

This also reduces the overall wear on your air conditioner. Since it doesn’t need to run 24 hours a day to reduce humidity, wear and tear on the device is reduced and you save a tremendous amount of money on repairs and eventual replacement costs.

When to Use a Dehumidifier Alone

Generally, the Department of Energy recommends setting your air conditioner to 78 degrees and using a combination of a dehumidifier and fans to stay cool while it is off. If the temperature rises above that level, the air conditioner will turn on and supplement your dehumidifier. Consider too that a dehumidifier will reduce the burden placed on your air conditioner to pull humidity from the air. Humid air takes more energy to cool than dry air. Despite the fact that dehumidifiers will often raise the air temperature by 1-2 degrees, they save energy and make you more comfortable.

So, if you’re looking for a way to reduce your energy bill, improve your indoor air quality, and enhance the longevity of your air conditioner, look no further than a quality dehumidifier.

When Should You Check Your AC Filters: A Tip From Chalfont

August 15th, 2011

The filters on your air conditioning unit in your Chalfont home are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.

Is Geothermal Right for My Home?

August 12th, 2011

Geothermal heating is a great alternative to other types of home heating systems in Lansdale. It is safe and efficient, costs very little to operate and makes use of a great renewable resource right below our feet. But is it right for you? Well, geothermal heating may be the right choice for many people, but there are many things to take into account before you can determine whether or not it is the best choice for your home.

The first important thing to understand when you are trying to decide whether or not to go with geothermal heating is how one of these systems actually works. A geothermal system heats your home by extracting heat from the ground and then transferring that heat into your indoor air. This happens when liquid, usually water or antifreeze, passes through a loop of pipes installed several feet below the ground.

The liquid absorbs heat from the ground, which in the winter is always warmer than the air, and carries is back up to an air handler inside your home where that heat is allowed to disperse into the air. Once the air is heated, the air handler blows the air through a system of ducts throughout your house, providing a constant stream of heated air to all areas of your home. The liquid, on the other hand, simply cycles back through the ground loop to pick up more heat and repeat the same cycle over again.

Because a geothermal heating system does not actually generate heat, it requires very little energy to operate. This means that it is both very cheap for you to run and environmentally friendly. But since installing a geothermal heating system involves putting pipes in underground, it can be pretty expensive initially. However, as long as the amount you save every month on your heating costs is enough to offset the high initial price of installation, it is worth it to put down the money up front.

Another alternative, of course, is a more traditional air source heat pump. These are much cheaper to install and nearly as cheap to run. However, air source heat pumps are not as efficient when the air temperature gets below freezing as a geothermal system can be. If you live in an area with harsh winters, the geothermal heat pump is a better option than an air source unit.

The Energy Efficiency Rating of Central Air Conditioners: What Is it and Why Is it Important? A Tip From Green Lane

August 10th, 2011

When you are shopping for a central air conditioning system in Green Lane, you will have to evaluate your options based on a number of different factors. For instance, you will need to decide which type of system is the best match for your home and for your particular cooling needs. It is also important to make sure that the central air conditioner you choose is the right size for the cooling load it will have to take on.

However, it is also very important to evaluate your central air conditioning options based on how energy efficient they are. This will have a great deal to do with how much you pay in terms of cooling costs each month, which makes it easy to see why you should take it into account before you make a purchase.

The energy efficiency of a central air conditioner is generally expressed as a seasonal energy efficiency rating, or SEER. The SEER numbers you will typically find on the latest air conditioning systems range from eight to 19.5 with the higher numbers signifying a more energy efficient model.

So it is pretty easy to figure out that a central air conditioner with a higher SEER will save you some money monthly because it will use less energy to get the same job done. But central air conditioners with high SEERs also typically have high price tags. So to determine how high of a SEER you need, you will need to know more exactly how much more money you will save as you move up in the rankings.

You can do this by comparing the SEER of the system you currently use with the new system you are considering and compare how much your current energy usage would cost you with each model. Basically, you want to pick a central air conditioner that will save you enough to offset the purchase price of the unit.

Often, this means that you will be best off with a SEER 14 or SEER 16 because these units save you a considerable amount over older models without carrying too high a purchase price. However, the amount you save will be directly related to how much you use your central air conditioning system, so if you live someplace that is extremely hot for a large chunk of the year, it may be worth it for you to buy a very high efficiency air conditioning system.

If you want more information about which type of air conditioner is right for you, contact your local HVAC professional.

Warning Signs: When to Call for an Air Conditioning Service

August 8th, 2011

The last thing you want is to be without an air conditioner during the hottest days of the year, especially in Elkins Park. Ideally you would never have to call for service to repair your air conditioning system, but just like anything else, your air conditioner will break down once in a while. However, you can dramatically reduce the inconvenience and cost of emergency air conditioning repairs if you are able to spot the warning signs of a problem before it shuts down your system completely.

For instance, all air conditioners make noise, but if your air conditioning system is suddenly making much more noise than it used to, chances are that something in there is not working properly. Calling for repairs when you notice this sudden increase in noise from your system will greatly increase the chances that the repair will be relatively minor and that you will not have to go without air conditioning when you need it most.

Also, it is a good idea to call for service if your air conditioning system does not seem to be doing as good a job as it used to when it comes to cooling your home evenly and effectively. Uneven cooling is a good sign that something is not working right within your system. And even if your air conditioner continues to work, it will probably be using up more energy than necessary for a less than ideal end result.

Along these same lines, a noticeable increase in humidity in all or part of your home is another good indication that something is wrong with your air conditioning system. Air conditioners both cool and dehumidify the air, so if yours stops removing humidity properly, you need to find out why.

In fact, even if you do not notice any difference in the way that your air conditioner is performing, you can still spot a problem if you keep a close eye on your energy bill. If you see a sudden increase in the amount of your bill because of the amount of energy that your air conditioning system is using, it is a good sign that something is not working right.

It may be tempting to put off calling for repairs, particularly if your air conditioner is still able to keep your house comfortable. However, it will likely be much cheaper and more convenient to have the repairs done early rather than waiting until the unit breaks down entirely.

What Is the Energy Star Label?

August 5th, 2011

Any time you go out and buy any type of appliance in Norristown, you probably notice that some have a distinct mark that signifies them as Energy Star appliances. That sounds like a good thing, of course, but what does it actually mean? Should you always buy an Energy Star model over another type?

The Energy Star label was originally developed to help consumers more easily recognize appliances that are more energy efficient than the average. In order to obtain an Energy Star seal of approval, any device must meet very strict guidelines when it comes to energy efficiency.

What that translates into for you as a consumer is a lower monthly energy bill when you buy Energy Star appliances. Of course, once they have obtained an Energy Star labels, manufacturers can charge whatever they want for their product, and it is not unusual to pay more for a model that is certified an Energy Star.

However, as long as the potential savings over time that you will get by using the Energy Star model as opposed to one that is not as energy efficient outweigh the difference in initial purchase price, it is worth it to spend a bit more on the Energy Star model.

Keep in mind, though, that just because a produce meets the Energy Star guidelines for energy efficiency does not necessarily mean that it is a superior product in terms of quality or overall effectiveness. Plus, not all Energy Star appliances are created equal. You should still do your research and pick out the product that will both save you the most money and has the best chance of getting the job done right.

Another benefit to Energy Star products is that, because they use less energy when they run, they also have a smaller impact on the environment than a model that uses a greater amount of energy to perform the same tasks.

Overall, it is definitely worth taking a closer look at all of the Energy Star options out there when you are purchasing an air conditioning system or any other type of appliance. Using less energy is always a good thing both for your bank account and for the planet. But you also want to make sure you are actually getting the best product for your money. Ask your local professional about other energy saving options.