Carney All Seasons Blog: Archive for October, 2011

How to Install a Toilet: A Guide From Ambler

Friday, October 7th, 2011

A toilet is a relatively basic piece of plumbing equipment, but that does not mean that installing it in your Ambler house is easy. This is certainly a job that many people can do on their own, but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.

Continue Reading

Tags: , , , , ,
Posted in Plumbing | Comments Off on How to Install a Toilet: A Guide From Ambler

What to Look For When You Have Water Damage: A Tip From Willow Grove

Wednesday, October 5th, 2011

Water can be a beautiful thing. But it can be a very nasty thing, too. While water is an essential for life, it brings a high price tag when gone unchecked and allowed to seep, leak, and drain into your Willow Grove home. Damage caused by water can cause structural damage to a building and destruction of its contents. When left unchecked – over time – water damage can lead to mold growth and have a serious affect on building occupants’ health.

The destructive forces of water leave telltale signs throughout a building. Let’s look at some.

  • Wood damage – water can saturate wood, causing it to rot and decay. Check for discolored wood around plumbing fixtures, a sure sign of an ongoing or older leak that has since been repaired. Just because a leak has been fixed, the after-effects can linger. Soft or uneven surfaces around a plumbing fixture are a sure indication of water damage. Pull back carpeting, pads, tiling, or flooring to get to the root of the problem.
  • Drywall damage – porous material like drywall can leave many signs of water damage and, like wood, can be seriously degraded by water damage. Check for discoloration around plumbing fixtures and soft spots. Don’t assume that a dry surface that is stained is not a structural problem. You may have to cut out the drywall to reach the true source of the water damage.
  • Ceiling tile stains – a sure sign that water is coming in from a source above a roof or ceiling. Ceiling tiles are a porous material that are great for showing every little bit of moisture or water that comes in contact with them. The same is true with plaster or drywall ceilings. Stains indicate a more serious problem and should be investigated right away.
  • Damp, musty smells – water can leave some unpleasant odors, especially untreated water. Leaks or standing water are a source for higher humidity levels in a home. If you are standing in an area where water has soaked into floors or walls, there is often a damp, humid smell. Don’t mistake it for high humidity levels in the home. The smell can come from hidden sources like a leaking pipe joint or broken valve behind an access door.
  • Mold build-up – wood and drywall surfaces provide great food for mold growth when saturated with water. The mold can be of a harmless nature but often can become dangerous black mold. When black mold spores are airborne they can cause respiratory problems and even worse, medial problems down the road. Look for unusual clusters of mold in damp areas and if you find some, immediately call a professional plumber to suggest clean-up and to repair the source of the water leak.

There are many signs of water leakage in the home, caused by leaking or broken pipes, dripping faucets from worn-out washers, cracks in the walls and foundations allowing ground and rain water to seep in, etc. Find and fix the source immediately or pay even higher costs in repairs later on.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on What to Look For When You Have Water Damage: A Tip From Willow Grove

No Heat in the House? Things to Check and Do in Buckingham

Monday, October 3rd, 2011

As you get ready for the cold months ahead in Buckingham, it is a good idea to remind yourself of some basic heating maintenance and repair facts. In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Continue Reading

Tags: , , , ,
Posted in Heating | Comments Off on No Heat in the House? Things to Check and Do in Buckingham