Carney All Seasons Blog: Archive for November, 2011

Common Water Line Problems

Monday, November 7th, 2011

Everyone needs water in Abington. It keeps us clean, provides us with a clean drinking source and helps us cook food and wash clothes. So, when a problem occurs with the water line, it can be disruptive to every aspect of everyday life. Here are some common water line problems and solutions you can implement to solve them as fast as possible:

  • Burst Pipe – The biggest problem you can have is a burst pipe. This is a major problem and one that needs to be solved immediately. If your pipe bursts or starts to leak, turn off the main water supply immediately and call an emergency plumber. You’ll want to have it patched as soon as possible to return normal water service to your home.
  • Noisy Pipes – Noise in the pipes is a slightly less disastrous problem but it can lead to bigger problems down the road if not dealt with. Usually, it is due to air in the pipes which can create a loud banging sound. If your pipes are vibrating or banging, the easiest solution is to turn off the water supply and drain your pipes completely, then fill them back up to remove the air build up.
  • Water Pressure – Low water pressure can be due to a number of problems, from a small leak somewhere to an issue in the incoming water supply. If you notice water pressure dropping in your home, call a professional to inspect the problem and offer potential solutions.
  • Sediment in the Pipes – If suddenly you are seeing excess sediment, rust, or other debris in your water it is probably from an aging pipe. While this doesn’t necessarily signal that your pipe is about to burst, it can be a sign of potential problems in the future. Build up from hard water or erosion can both be major problems if not fixed right away.

Water line problems can range from small nuisances to major disasters that threaten your entire home, but they should all be treated with equal import. If something happens to your water line, don’t waste time trying to track down a solution. Turn off the water supply and call a professional right away.

Continue Reading

My Furnace isn’t Producing Enough Heat

Friday, November 4th, 2011

If your Telford home is cold, many blame the furnace for not bringing up the warm temperatures or they blame the thermostat for not working right.

It may very well be a thermostat issue – often caused by the location of the thermostat – that is causing the problem. However, sometimes root cause is found in the furnace or ventilation system.

Your indoor environment may be contributing to a seemingly slow-moving furnace. Your furnace may be working too hard to keep up with the heat demand because of an excessive build-up of dirt or debris on the filter or around the moving parts, such as the motor or fan belt. The most obvious thing to do is to keep the airflow unobstructed and keep all working parts clean.

First of all, you should regularly check your furnace filters and if they are dirty, replace them or clean them. Disposable furnace filters are relatively inexpensive and come in a variety of sizes and media ratings (ratings determine what size media is used and its ability to trap certain sized particulate). You can buy these individually or in bulk from a number of different resources. It is a good idea to replace the filters every three-six months.

Mesh filters can be removed, cleaned and reinserted. Like replaceable filters, mesh filters should be checked on a regular basis and then cleaned at least every three months.

You can remove the access panels to your furnace and inspect the components for any build-up of dust, dirt, or debris. Using a vacuum with an extension hose usually is all it takes to clean up the area.

Other reasons for poor heating performance include dirty or blocked ductwork. The harder your furnace has to work to push air through the ventilation system, the longer it takes to bring the heat up. Make your furnace work less and keep vents clear and ductwork clean.

Finally, the reason your furnace isn’t producing enough heat may not be the fault of your furnace at all – you may have a leaky house. But that’s a whole different story.

Continue Reading

Is Your Furnace Making too Much Noise?

Wednesday, November 2nd, 2011

The old saying that “It is better to be seen than heard” certainly applies to the mechanical equipment in your Ambler home. If you hear a squeaky noise or loud clattering you automatically suspect that something is wrong. And if that noise is coming from your furnace, you better pay attention to it. A noise is an obvious sign of a problem – minor or major – and it could result in mechanical failure that could leave your home cold and uncomfortable – and affect your home’s indoor air quality.

Today’s newer variable-speed furnaces keep a constant airflow through the ventilation system utilizing a low speed fan that consumes small amounts of electricity. Constant airflow brings in fresh air and keeps the room air from becoming stale or stagnant. Because of this constant operation, it is important to ensure the furnace is running at peak efficiency, which also means that it is running quietly.

Here are some common noises, possible reasons, and suggested repairs. As always, if you are in doubt about how to repair your furnace, call a local qualified heating contractor and schedule a service call.

  • Squealing noise – could be a worn out or slipping blower belt. Check for proper tension of the belt or replace the belt if it is worn out or cracked.
  • Squealing noise – could be worn out motor shaft bearings. Lubricate the blower motor at the proper points.
  • Rumbling noise – often caused by a poorly adjusted pilot light when the burners are turned off. Adjust the pilot as necessary.
  • Rumbling noise – often caused by dirty gas burners when the burners are switched on. This problem requires service from a qualified heating technician.
  • Buzzing noise – often caused when a blower motor mounting come loose. Tighten the mounting screws or use shims to fill gaps.
  • Hissing noise – indicates a possible air leak. This problem requires service from a qualified heating technician.
  • Ticking noise – possibly a leaky gas valve. This problem requires service from a qualified heating technician.
  • Rattling noise – could be a dirty fan blade. Wipe the fan blade or clean with degreaser.
  • Rattling, grinding, or whining – could be resistance to airflow that causes the motor to work harder. Check the vents in each room for dirt, debris, or obstructions and clear them.
  • Vibrating noise – may not be the furnace but loose or cracked seams in the ventilation system. Check the ductwork seams and hangers to ensure everything is tight. You may need duct tape or bracket hardware.

The best way to keep your furnace and ventilation system from making noises is to practice preventative maintenance. Have your furnace checked annually by a qualified heating contractor – and enjoy the peace and quiet.

Continue Reading