Carney All Seasons Blog: Posts Tagged ‘Blue Bell’

Save Money in the Long Haul with AC Maintenance

Friday, September 2nd, 2011

Every year, it’s recommended that you have an HVAC contractor visit your Blue Bell home and tune up your air conditioner. This visit will ensure the system is ready for the intense, regular use it will receive during the hottest months of the year. How much money can this visit save you, though? Let’s take a closer look.

Cost of Operating Your Air Conditioning

An air conditioning system on average costs a homeowner between $500 and $1500 per year to operate depending on the length of the cooling season and the efficiency of that air conditioner. That number represents top efficiency for the unit, however. When a system has dirty filters, hasn’t been cleaned properly or the thermostat is no longer calibrated accurately, the cost increases – sometimes dramatically.

Just how much more could you be spending on cooling each month when this happens? The EPA’s Energy Star website estimates an increase in cost of between 10-30% resulting from poorly maintained systems, and it can be even higher if your system is old and is severely affected by a drop in energy efficiency.

Annual Tune Up Necessities

So, what should be at the top of your tune up list? If you call a contractor, they will perform a variety of tasks including:

  • Inspect Coolant and Pressure Systems
  • Calibrate the Thermostat
  • Tighten Wiring, Capacitors, Relays and Contacts
  • Clean the Evaporator Coil
  • Clear and Clean the Condenser and Condensate Drain
  • Inspect the Condenser Fan and Motor
  • Check Compressor Efficiency

This is just a starter list for standard tune up of a central air conditioning unit. You can supplement this tune up by checking your filters once every 30 days and clearing away debris from around any outdoor units. You should also check your thermostat monthly to ensure it is working properly. If not, call for an inspection to avoid heavy increases in operating costs.

Major repairs to your air conditioning system generally take less than a day and when you’re on an annual maintenance plan, they cost significantly less than if you needed someone to fix the device in an emergency situation.

Continue Reading

Will My Air Conditioning Work Better with Dehumidification

Wednesday, August 17th, 2011

There are a number of common misconceptions, in Blue Bell and everywhere else, about humidity and air conditioning and how one affects the other. In truth, humidity is a major part of the discomfort we feel when the mercury rises. It can be 78 degrees outside but feel miserable simply because the humidity is high. So, many people wonder whether a dehumidifier is a good solution to moderate heat and how it will work in tandem with an air conditioner.

Humidity and Your Air Conditioner

First, remember that air conditioning naturally lowers humidity because it cycles air through its condenser and evaporator coil. Conditioned air is naturally lower in humidity, regardless of what’s going on outside. So, if it is hot outside and humid, an air conditioner alone is very effective. On the other hand, a dehumidifier is useful is when the temperature isn’t that high but the humidity is.

Dehumidification not only lowers the relative humidity in your home, it reduces the need for cooling because you will feel more comfortable. Not only that, but a dehumidifier costs significantly less to run. So, when the temperature outside isn’t that high, there is no need to use thousands of watts per day of electricity just to stay comfortable.

This also reduces the overall wear on your air conditioner. Since it doesn’t need to run 24 hours a day to reduce humidity, wear and tear on the device is reduced and you save a tremendous amount of money on repairs and eventual replacement costs.

When to Use a Dehumidifier Alone

Generally, the Department of Energy recommends setting your air conditioner to 78 degrees and using a combination of a dehumidifier and fans to stay cool while it is off. If the temperature rises above that level, the air conditioner will turn on and supplement your dehumidifier. Consider too that a dehumidifier will reduce the burden placed on your air conditioner to pull humidity from the air. Humid air takes more energy to cool than dry air. Despite the fact that dehumidifiers will often raise the air temperature by 1-2 degrees, they save energy and make you more comfortable.

So, if you’re looking for a way to reduce your energy bill, improve your indoor air quality, and enhance the longevity of your air conditioner, look no further than a quality dehumidifier.

Continue Reading

When Should You Check Your AC Filters: A Tip From Chalfont

Monday, August 15th, 2011

The filters on your air conditioning unit in your Chalfont home are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work.

Continue Reading

Geothermal Myths

Friday, March 25th, 2011

As with any misunderstood technology, there are a lot of myths and misconceptions concerning geothermal heat pumps and how well they work. While these types of systems certainly have their limitations, the same is true of just about any type of heating and cooling system you could have installed in your home. But if you are really trying to evaluate whether or not a geothermal heating system is right for your home, you need to know exactly what is true about these systems and what is just not true.

For instance, there is a widely held belief that geothermal energy is not a viable heating option in areas with harsh winters. The fact is, though, that even when the air temperature outside is below freezing, the temperature several feet below ground can be as high as 55°F.

With a ground temperature like that, a geothermal heat pump will have no trouble extracting enough heat to keep your home comfortable even when it is well below freezing outside. And even when the ground freezes, the frost usually only extends three or four feet below the surface. Since the pipes for your geothermal heat pump will be at least four feet down, the frost should not affect them at all.

Also, it is common for people to assume that geothermal heat pumps will always need to have a regular heating system in place to serve as a backup. In fact, a geothermal heat pump is quite capable of providing consistent and adequate heating for your entire house as long as it is properly sized and installed. Make sure you are dealing with an experienced and qualified contractor and you will have no problems along these lines.

There are also plenty of myths floating around out there that geothermal heat pumps are just too expensive to make sense as a home heating solution. The truth is that geothermal heating costs almost nothing to operate.

While it is true the geothermal systems are quite a bit more expensive to install than many of the other options, alternative heating systems will still cost a significant amount to install and you will also have to pay much more to operate them on a regular basis. With a geothermal heating system, you pay quite a bit up front, but it is a one-time cost and there will be minimal monthly heating bills after that.

Continue Reading

The Energy Star Label

Friday, January 14th, 2011

The Energy Star program is a joint program of the US environmental protection agency and the US department of Energy. The program’s goal is to help consumers save money and protect the environment through energy-efficient products and practices.

The best-known aspect of the Energy Star program is the Energy Star label, which is awarded to appliances and other items that are significantly more efficient than average. Energy Star efficiency guidelines vary depending on product category, but in general, Energy Star products use 20%-30% less energy than minimum federal standards.

The Energy Star guidelines were designed both with energy efficiency and performance in mind. While low energy use is one of the most important criteria for selecting Energy Star appliances, product performance, features, warranty, safety, and durability are also taken into account. Price is also a factor: if a product costs significantly more than other products in its category, it will only receive the Energy Star label if the up-front cost will be recovered through savings in operating costs within a reasonable amount of time.

The first Energy Star labels were given to computers and monitors in 1992. Now labels can be found on many other products, including:

  • Furnaces
  • Hot water heaters
  • Air conditioners
  • Dishwashers
  • Refrigerators
  • Light bulbs (florescent and LED)
  • TVs

Energy Star products can be found wherever appliances and electronics are sold. Look for the blue and white Energy Star label. You can also look for the yellow EnergyGuide label that is affixed to most heating and cooling systems and household appliances. This label is created by the Department of Energy and shows a product’s annual cost of operation compared to similar models. It will often indicate whether a product is Energy Star.

It’s important to note that while an Energy Star label indicates that a heater, air conditioner, or household appliance is more efficient than the minimum guidelines, it does not always mean that you are getting the most energy efficient option on the market. If you are making a major appliance purchase, use the Energy Star label to be sure every model on your “short list” is energy efficient. Then, look carefully at the EnergyGuide label to compare the efficiency of the models you are considering.

The EPA has also extended the Energy Star label to cover new homes and commercial and industrial buildings. To qualify for the Energy Star rating, a new home must use at least 15% less energy than standard homes (built to the 2004 International Residential Code). Energy Star homes usually include insulation, high-performance windows, energy-efficient heating and cooling systems, appliances, lighting, and water heaters.

The Energy Star standards and label have been recognized in many other countries, including Canada, Australia, Japan, New Zealand, Taiwan and the European Union.

Continue Reading