Carney All Seasons Blog: Posts Tagged ‘Trumbauersville’

How Does Geothermal Energy Work?

Wednesday, March 23rd, 2011

Geothermal energy is energy extracted from the ground. This energy is in the ground in the first place because the ground absorbs the heat coming from the sun. This heat is always there, even when it is very cold outside. In fact, even when the ground appears to be frozen, you can actually extract plenty of heat to keep your home nice and toasty.

While this may at first appear to defy logic, the way that geothermal energy can be used for heating your home is actually quite simple. A geothermal heating system typically consists of an indoor air handler with a fan, a series of air ducts for the heated air to travel through and a closed loop of pipe that extends into the ground below and around your home.

This closed loop of pipe is actually where the geothermal heat is collected. Some type of liquid, usually water or antifreeze, will be continuously run through this pipe loop. As the liquid passes through the area of pipe that is below ground, it will absorb the heat from the surrounding soil. Once the liquid makes it back up to the air handler, the heat is able to disperse, heating the air in the chamber.

This heated air is then circulated throughout your house through the ducts by a fan. After it has released its heat into the air in your home, the liquid will cycle back into the ground to absorb more. This allows a geothermal heating system to provide you with a constant supply of warm air.

Unlike a furnace, which mixes in blasts of very hot air with periods of inactivity to try and keep your house at a constant temperature, a geothermal heat pump is able to provide a more consistent flow of air that is just the right temperature to keep your home comfortable. This means that these types of heat pumps are running just about all of the time as opposed to furnaces, but they are designed to work this way and the constant operation does not cause any excessive wear and tear.

Another great benefit of geothermal heat pumps is that they are able to keep your house cool in the summer as well. Just as the ground is warmer than the air in the winter, it is also cooler in the summer. That means that heat removed from your indoor air can be transferred to the ground in the same way that it was transferred in during the winter.

Continue Reading

Green Your Plumbing

Monday, January 24th, 2011

These days, “green plumbing” is getting increasing attention, especially in dry areas like the southwestern US.

“Green plumbing” helps the environment by doing one or more of the following:

  • Saving water
  • Saving energy
  • Using environmentally-friendly materials

There are a wide range of green plumbing products that can make a big difference in how much water and energy your home uses. They range from simple accessories that cost less than $20 to major home remodels. Here are a few of them, ranging from the simple and immediate to larger investments with a longer-term payback.

  • Low-flow showerheads and faucet accessories (often called “aerators”). Check the side of your current faucet and showerhead to see if they use more than 1.5 GPM and 2.0 GPM, respectively. If they do, you can benefit from an upgrade. Look for the EPA WaterSense label to be sure that your new showerheads and faucet accessories are water-efficient.
  • Hot water heater blankets and pipe insulation.You don’t need to insulate your hot water heater and  pipes to prevent freezing, but doing it will save money, water, and energy, and (as a bonus) you’ll enjoy hotter showers in the winter. This is a simple DIY job and the materials are extremely affordable.
  • Touch-free faucets. When you’re not actively using them, touch-free faucets shut off. According to industry estimates, the result can be a water savings of up to 70%. Touch-free faucet technology has improved greatly in recent years, and sensors are now very reliable. If you like your current faucet and want to keep it, there are also touch-free faucet conversion kits.
  • Dual-flush toilets. As the name suggests, these toilets have two different flushes: a “half-flush” for liquid waste, and a “full flush” for solids. Dual-flush toilets are standard in many European countries and are becoming increasingly popular in the U.S. because of their water-saving potential (up to 68% over conventional toilets) and sleek styling.
  • Tankless water heaters. Unlike conventional tank heaters, which use energy constantly to maintain a reserve supply of hot water, tankless heaters only use energy when hot water is needed.  Tankless water heaters are not quite “instantaneous”, as some manufacturers claim, but they provide hot water within a few seconds. Good quality heaters can provide hot water to multiple fixtures simultaneously.
  • Sprinkler system upgrades. Much of the water from spray sprinkler systems evaporates. Trickle and drip irrigation systems can improve water efficiency by delivering smaller amounts of water directly to the base of the plant. Other products, such as pressure regulating spray heads and rotors and automatic rain sensors, can also save thousands of gallons a year. Another option is to re-use laundry waste water by diverting it into the garden. This can be a DIY project or can be built directly into your plumbing. Check with your local authorities to find out if this is permitted in your area.

Continue Reading