Carney All Seasons Blog: Posts Tagged ‘Buckingham’

Five Important HVAC Maintenance Tips

Friday, November 11th, 2011

Do you have a “mental checklist” of chores that need to be done a regular basis around your Solebury home, such as cleaning the window treatments, washing windows, shampooing rugs, etc.? There are various areas of your home that need regular maintenance and cleaning – and that list includes your heating and cooling (HVAC) equipment. Do you know a poorly operating furnace can cost you in increased energy usage and higher utility bills? That same poorly operating furnace can be discharging harmful carbon monoxide gas into your home, creating a health risk.

So, it is important to keep your furnace in peak operating condition and the best way to do that is by making a checklist of HVAC maintenance tasks. Let’s look at five of them.

  1. Check your filters. Routine replacement of your furnace filters should be every 1-3 months, depending on the indoor air quality of your home, number of occupants, size, etc. You can purchase disposable filters online, at a local “big box’ retailer, or from your local HVAC contractor. A visual inspection of your filter is the best way to determine if it needs replacing. If you have a removable electronic filter, it should be cleaned every few months using soapy water and a hose. Any restrictions to air flow through the filters can lead to poor indoor air quality and will cause your furnace to work even harder to circulate warm air through your duct system.
  2. Clean and insect the blower assembly and motor. You can do this with a vacuum. Also check the fan belt to make sure it is not too loose or if it has any cracks or splits.
  3. Look for any obstructions in vents and returns. Believe it or not, your furnace needs “help” to operate. Any build-up of dirt or debris around the grilles of your ventilation system will just make your furnace work a lot harder. Do a visual check inside and outside and pay special attention to flues and chimneys, where indoor air is exhausted. Any blockage can result in an accumulation of poisonous carbon monoxide gas.
  4. Keep the area clean and clear around your furnace and water heater. Never store flammable liquids near your heating equipment. Your furnace room is not a storage closet.
  5. Revisit your home’s insulation. When was the last time you checked out the insulation in your attic or crawlspace? Is it securely in place or drooping down? Are there bald spots where the insulation has deteriorated? Is the insulation sufficient or should it be upgrade?

Tips 1 and 2 relate directly to furnace maintenance but tips 3 to 5 are equally important, having a direct bearing on how your furnace performs and its ultimate efficiency. If you follow all five tips and have an annual inspection from a qualified HVAC contractor, you should enjoy a fall season of comfort, warmth, and safety.

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Five Important HVAC Maintenance Tips

How Often Should I Replace My Furnace Filter?

Wednesday, November 9th, 2011

Just like the filter in your air conditioner, replacing your furnace filter is the key to a healthy and comfortable Willow Grove home. By keeping a good filter replacement schedule, you will reduce wear and tear to the furnace and keep your home warm, while keeping your family healthy and controlling energy costs all winter.

But when does your furnace filter need to be changed? Well, each system is different, but there are some general guidelines and recommendations to follow that can help you keep it all straight and stay on top of your furnace filter situation.

Conventional Wisdom

The long-standing rule of thumb on furnace filters is to change them every month. This is good practice if you are using older fiberglass filters, but for newer, more efficient filters, you should do it a little differently. These should be inspected and cleaned at least once a month, but you may need to replace them that frequently also.

Sometimes it is a little more complicated than these general guidelines, so it pays to be aware of some factors and conditions in your home that may affect how frequently you need to change your filter.

Things to Consider

As mentioned above, the first thing to consider is the efficiency of the filter. Because new filters are so efficient, when they get dirty or clogged with dust and debris, they actually restrict airflow, making your furnace bog down and work harder. So, it is important to stay on top of a monthly inspection and cleaning schedule with these filters.

Also take into account air quality and sources of allergens both inside and outside your home. If you live in an area with a lot of pollutants in the air, you’ll want to replace your filters often to keep those out of your home. If you own a lot of pets, the dander and hair will wind up in your furnace filter and you may have to replace it more often.

Complicated enough for you? It doesn’t have to be. Simplify the whole process by doing the following: check your filter monthly and be prepared to change it that often, clean high-efficiency filters regularly, replace the filter at least every three months and again at the start of heating season.

If you do those things at a minimum, you will be in pretty good shape. If have any questions about furnace maintenance, contact your local contractor.

Continue Reading

Tags: , , , , , , ,
Posted in Heating | Comments Off on How Often Should I Replace My Furnace Filter?

No Heat in the House? Things to Check and Do in Buckingham

Monday, October 3rd, 2011

As you get ready for the cold months ahead in Buckingham, it is a good idea to remind yourself of some basic heating maintenance and repair facts. In general, when your heating system stops working, you’ll need to call a professional to come out and take a look. However, before you do that, there are likely a couple of things you can check on your own to ensure that there really is a problem with the system itself.

For instance, if it’s cold in your house and your heat isn’t coming on, check to make sure that the thermostat is set to a high enough temperature that the heating system would be triggered. Particularly if this is the first really cold day of the season, it’s entirely possible that your thermostat was turned down at some point and left there. And if the thermostat isn’t turned up high enough, the heat will never come on.

Also, it’s worth just taking a second to check and make sure that the power switch on the heating system itself is actually in the proper on position. For the most part, there would be no reason for you to turn this off, but it’s always possible it could have happened in any number of ways and it only takes a second to check.

Depending on the type of fuel source your heating system uses, it’s probably a good idea to check to make sure the supply is still available as well. If you use natural gas, check to make sure that the gas line is open, but don’t try to repair it yourself if it seems to be compromised. If you find something like that, be sure to call your gas company right away.

However, if you use oil as a heat source, take a quick peek at the levels in your tank. There’s always the possibility that you used more than you thought you did or that a delivery was missed for some reason and so your heating system simply has no fuel to run on. Similarly, if your heating system runs on electricity, make sure that the fuse wasn’t blown or that it’s not just too loose to provide an adequate power supply.

If you’ve covered all of these basic troubleshooting bases, it may be time to take a closer look at the heating system itself. On just about every type of system there should be some type of reset switch or button. Follow the instructions to press this button and engage the reset process, but be sure to only try this once. If that resetting doesn’t work, it’s time to back off and call in some professional help.

Continue Reading

Tags: , , , ,
Posted in Heating | Comments Off on No Heat in the House? Things to Check and Do in Buckingham

Unclogging a Floor Drain: A Tip From Buckingham

Wednesday, September 28th, 2011

It is never fun to wander down into the basement of your Buckingham home only to find that your floor drain has backed up. This is not a situation that will take care of itself and you want to get it under control as quickly as possible. While there are certainly plenty of things you can do to try and unclog a floor drain on your own, there are quite a few potentially complicating factors to consider as well.

First of all, you should make sure that no one in the house turns on any running water for anything until the drain has been unclogged. The floor drain in your basement is usually the last stop on the line for all of the water used in your house, and so any running water anywhere above will only cause more water to back up in the basement. Of course, if you cannot use any running water anywhere else in your house, it is even more imperative that you are able to unclog the floor drain quickly.

If you happen to have a snake on hand, this may be the best option to try first. However, it can be a bit difficult to get the snake to make the sharp turn typical of these types of drains not long after the pipe descends below the floor. That is not to say that it cannot be done, but you should be aware that you need to make sure the snake turns the corner before it will be useful to you at all.

If you do not have a snake of your own, you may still be able to take care of the blockage without calling in a professional plumber. But first you have to find it. Depending on the layout of your drainage system, this may be easier said than done. You can also make a pretty big mess if you open up various sections of pipe looking for the blockage, so be aware and make sure you have something in place to catch the runoff and debris that may come out of the pipes when you open them.

You may also run into trouble if the blockage is actually outside of your house in the larger sewer line that runs to the street. Unclogging a drain with this type of problem is generally a job for a professional and there is very little you will be able to do on your own.

Continue Reading

Tags: , , , ,
Posted in Plumbing | Comments Off on Unclogging a Floor Drain: A Tip From Buckingham