Carney All Seasons Blog: Posts Tagged ‘Toilet’

What to Do If Your Toilet Overflows

Monday, March 18th, 2019

toilet-with-button-flushThis is one of the most common plumbing problems we get emergency calls about. We understand—it’s alarming to have a toilet suddenly start spilling water onto a bathroom floor with no signs of stopping!

We have good news for you! An overflowing toilet doesn’t have to be a major disaster for your home. First of all, we can fix it—and we provide same-day service so you won’t have to go with an unusable bathroom for long. We know how important this room is to your household’s daily life, and we’ll be there fast to have the toilet fixed.

Second, if you take the right steps, you can prevent further problems from the overflowing toilet and stop water damage. Below are guidelines for what to do when you encounter this sudden plumbing trouble.

Continue Reading

What Causes a Toilet to Run?

Monday, October 28th, 2013

A constantly running toilet is one of the most frequent plumbing problems we encounter in our work. People often ask us what causes a toilet to run and what they can do about it. There isn’t one simple answer to this question; a number of issues can occur in the tank of your toilet that will make it continually run water after it has last been used.

There are two things about a running toilet that you should know upfront: First, don’t panic—a running toilet is rarely a cause for flooding in your home. Second, you need to get it taken care of as soon as possible because of the enormous waste of water it causes. A running toilet can use 2 gallons of water a minute, so imagine the amount of water that will go to waste if it stays running for a few hours.

A plumber will then go down a list of the reasons for that nonstop running. The plumber will lift off the lid from the tank (very carefully, because lids are expensive to replace should they break) and point out the various places where the trouble might lie:

  • The flapper: This seal on the bottom of the tank can become loose from age deterioration. Since it’s supposed to stop water from flowing out of the tank, it will need to be replaced to create a watertight seal.
  • The chain: The chain to the flapper can be tangled or too tight, in which case the flapper won’t be able to close.
  • The ballcock: This valve device, usually near the handle on the tank, controls the flow of water. When the float (see below) rises high enough, the ballcock will shut off the flow. A malfunctioning ballcock won’t prevent the water from continuing to run.
  • The float: This balloon-like object rests on the top of the water, and when it rises high enough, it will cause the ballcock to close off the flow. If the float breaks, it can’t measure the water level.

Hopefully, this advice will help you get to the bottom of what’s happened. If you find yourself confused or worried about your running toilet, don’t hesitate to contact a Carney Plumbing Heating & Cooling professional. Our plumbers can fix most running toilet problems in a short time, so you won’t have money going down the drain.

We’re available with same-day service when you need plumbing assistance. Feel free to ask one of Carney Plumbing Heating & Cooling’s plumbers in Blue Bell, PA anything: we wouldn’t offer a 100% satisfaction guarantee if we weren’t confident in our answers!

Continue Reading

Plumber Tip: Why Your Toilet Keeps Running

Friday, October 18th, 2013

You know the scenario: you’re sitting peacefully in a room of your house, reading a book, watching television, or sorting laundry… and then you realize the sound of the toilet running has been going on for a while. Much longer than it should considering when it was last used. That can’t be right. But what’s causing it? And is it an emergency?

Fortunately, a toilet that keeps running isn’t normally a sign to panic. Often, it’s a small glitch that’s easy to take care of. And if it’s something you can’t fix on your own, it’s usually an issue that a professional plumber can repair fast and without much difficulty. But you should get a run-on-toilet taken care of as soon as you can, because even if the malfunction isn’t threatening your plumbing or on the verge of causing flooding, it is wasting water—using up to 2 gallons a minute! If you’re looking for a Lansdale, PA plumber to handle a problem like this, contact Carney Plumbing Heating & Cooling right away—and get the proper repair done right away!

When you notice the problem start, remove the lid of the toilet tank and watch the internal mechanisms at work when you pull the handle. (Please, please be careful with the lid—replacements can be expensive, far more than any of the interior components.) This should help you identify where the problem lies. The flush valve might be sticky. Perhaps the tankball is damaged and incorrectly gauging the level of the water. The ballcock might not be closing properly. The chain to the flapper could be too tight. If you’re familiar with the basic operations inside a toilet tank, you should be able to see if anything is working incorrectly.

Sometimes you can do a quick adjustment by hand (don’t worry, the water in the tank is clean) to fix a misplaced chain. However, if you’re not sure what to do, don’t fiddle around in there too much and risk causing a problem that might lead to overflow. A professional plumber can diagnose the trouble in only moments and will know what parts will need replacement or repair.

Because a running toilet can rapidly cause your water bills to mount—imagine wasting a 120 gallons in just an hour!—getting a plumber to analyze and fix the trouble with a few replacement parts is a worthwhile investment. Don’t just let the toilet continue to run and think it’s no big deal. Get a Lansdale, PA plumber on the job. Contact us at Carney Plumbing Heating & Cooling: same day service, satisfaction guaranteed!

Continue Reading