Carney All Seasons Blog: Posts Tagged ‘Silverdale’

Where Are My Shut Off Valves?

Wednesday, July 6th, 2011

Whenever you want to do some home repairs on your plumbing, whether it is to change a leaky faucet or fix knocking pipes, you need to shut off the main water supply. But, most home owners do not know where their main shutoff valves are, especially if they have just moved in or are renting a home that is unfamiliar to them. To help, here are some common places you can look for shutoff valves in your home.

  • Water Meter – The Water Meter, which you can usually find in your basement or just outside your home, will have a shutoff valve attached directly to it. Usually there will be two shutoff valves – one on each side of the meter (supply and home). To effectively shut off your water supply, turn the valve located before the meter.
  • Toilet Supply – Sometimes you do not need to cut off the main water supply to your entire house. It can be disruptive and the people in your home may not appreciate not having drinking water or a shower while you are working on the plumbing. So, when working on the toilet, always look for the toilet water valve located behind the tank. Sometimes this valve will be on the floor – other times it will be located on the wall just behind the tank.
  • Finding Wily Supplies – Sometimes the water supply may not be located where you would expect. It might be behind appliances or access panels or above your head somewhere. Most of the time, the water supply will still be in the basement, so start there and look carefully for the root of the pipes. Since most of the pipes in your home will originate at the supply line, you can usually trace them back to a single source.

If you still cannot find your main water supply line and shutoff valve, that does not mean it is hidden in the floor somewhere or outside. Sometimes, the supply lines are just in odd places, either because of strange construction or poor renovations by a past owner. If this is the case, get a second pair of eyes to help you hunt or as a last ditch option, call a plumber who will be able to more easily follow the lines back to their source. Nine times out of ten, you should be able to find and handle a main water supply on your own. But never rule out calling for a professional’s help if things get more complicated than anticipated.

Continue Reading

What Is a Flapper Valve?

Wednesday, April 20th, 2011

Your toilet is not an overly complicated piece of equipment. But in order to work properly, it does require that all of its parts are in the right place and in good shape. Even if something small on your toilet is out of place, it can cause problems like constant dripping or running, improper flushing force or a sudden refilling of the bowl when no one has flushed the toilet.

These problems can sound serious, but many of them are quite easy to address if you know where to look. With most toilets, that place is the flapper valve. The flapper valve is a relatively small rubber plug that fits over an opening at the bottom of your toilet tank. When you press the handle to flush your toilet, the flapper valve lifts up and allows all of the water from the tank to go rushing into the bowl.

The force of this water pushes everything out of the bowl through the drain at the bottom, clearing the bowl and refilling it with fresh water all at once. As long as the flapper valve is able to maintain a tight seal, this process will go along smoothly without a hitch. But sometimes these valves become dirty or simply wear out.

When that happens, water can begin to leak down from the tank into the bowl on an almost constant basis. Depending on the severity of the leak, this may just cause the toilet to run constantly. Or it can even cause periodic “phantom flushes” were the toilet clears the bowl without anyone pressing the handle.

Phantom flushes occur because too much water has seeped down from the tank into the bowl. When the volume in the toilet bowl reaches a certain level, the water in the bowl is forced out, resulting in a flush. This wastes water and can also be pretty startling if you are not expecting it. Fortunately, though, you can usually fix this problem easily enough.

To do this, check your flapper valve to make sure it is keeping a tight seal with the bottom of the tank when not in use. If it is not, you may only need to clean it off to restore the integrity of the seal. In more serious situations, however, you may need to replace the flapper valve entirely. This is not difficult or expensive and can save you a lot of water in the long run.

Continue Reading